Nothing Beats The Shark™
Trusted by plumbing professionals for more than two decades, SharkBite has been the industry leader in plumbing innovation. This legacy continues with SharkBite Max fittings, which are our toughest fittings yet – rated to 400 psi.
Putting SharkBite Max to the Test
Our team of engineers put SharkBite Max to the ultimate burst test. See how this new generation of fittings holds up to pressure ratings that go above and beyond industry standards.
SharkBite Max fittings are made to be more durable. They're made to higher pressure specifications and ratings, and I like using something that I know I can trust to last for a long time.
L'intérieur d'un raccord SharkBite
Bien que de nombreuses personnes aient essayé de reproduire notre technologie, la recherche prouve la fiabilité et la performance inégalées de SharkBite par rapport aux autres produits sur le marché.
Les corps en laiton DZR sans plomb* confèrent aux raccords SharkBite la solidité nécessaire pour résister à la corrosion chimique du matériau, évitant ainsi la décomposition par dézincification que l'on trouve dans les laitons de moindre qualité. *Selon la loi relative à la sécurité de l'eau potable (Safe Drinking Water Act), les produits sans plomb contiennent moins de 0,25 % de plomb.
Nos joints toriques en EPDM, solides et sûrs, sont spécialement conçus pour assurer une étanchéité plus forte que les autres produits de type "raccord instantané". Ils sont résistants à la chloramine et certifiés par la norme ASSE 1061.
SharkBite n'utilise que des anneaux de serrage en acier inoxydable de qualité 316 dans ses raccords afin de garantir une connexion solide et sûre et une résistance élevée à la corrosion dans toutes les conditions.
En savoir plus sur la qualité SharkBite
Découvrez l'intérieur d'un raccord SharkBite Max™ de SharkBite
Comment installer les raccords SharkBite Max
Témoignage : Ben Calmes utilise SharkBite Max
SharkBite Max FAQs
We redesigned the inside of the fitting, so it no longer requires a PEX tube liner, making installations simpler especially when working on copper and CPVC. When using SharkBite Max polybutylene adapters, a tube liner is included and required on the polybutylene end (gray collar). When using on HDPE SDR-9 pipe, a tube liner is required and needs to be supplied directly from the pipe manufacturer.
The insertion depth for SharkBite Max differs from SharkBite (1st Generation). Reference your correct SharkBite Max insertion depth here.
| SharkBite Fitting Size | Nominal Pipe Size | Pipe OD | SharkBite 1st Generation Insertion Depth | SharkBite Max Insertion Depth |
|---|---|---|---|---|
| 1/4 in. | 1/4 in. CTS | 3/8 in. | 13/16 in. (21 mm.) | |
| 3/8 in. | 3/8 in. CTS | 1/2 in. | 15/16 in. (24 mm.) | |
| 1/2 in. | 1/2 in. CTS | 5/8 in. | 15/16 in. (24 mm.) | 1 in. (25 mm.) |
| 3/4 in. | 3/4 in. CTS | 7/8 in. | 1-1/8 in. (28 mm.) | 1-1/4 in. (32 mm.) |
| 1 in. | 1 in. CTS | 1-1/8 in. | 1-5/16 in. (33 mm.) | 1-1/2 in, (38 mm.) |
| 1-1/4 in. | 1-1/4 in. CTS | 1-3/8 in. | 1-7/8 in. (48 mm.) | |
| 1-1/2 in. | 1-1/2 in. CTS | 1-5/8 in. | 2-1/16 in. (52 mm.) | |
| 2 in. | 2 in. CTS | 2-1/8 in. | 2-3/16 in. (56 mm.) |
SharkBite Max is stronger and faster because of a few key upgrades:
- A newly designed stainless-steel retainer delivers additional strength and double the burst pressure.
- SharkBite Max fittings no longer require a tube liner for PEX applications per ASSE 1061.
- A re-engineered body allows you to insert the pipe using less effort for a smoother connection.
SharkBite Max will be replacing 1st generation fittings in phases. This means you may see a mix of both options on shelves.
Visit our Where to Buy page below to find a retailer, wholesaler or an authorized sales rep near you!
SharkBite Max is compatible with:
- Copper
- PEX
- CPVC
- PE-RT
- HDPE SDR-9
Yes. There’s a specific fitting for transitioning from polybutylene to CTS tubing. The side of the fitting with the gray collar connects to the polybutylene pipe and has a tube liner while the tan collar will connect to the CTS pipe.
While there isn’t a SharkBite Max PVC transition fitting, 1st generation PVC transition fittings will continue to be available. The side of the fitting with the white collar connects to the PVC pipe and the tan collar will connect to the CTS pipe.
Plumber feedback drove the redesign. SharkBite Max offers:
- Easier installation
- Higher pressure ratings
- No need for PEX tube liners
SharkBite Max meets all applicable codes and standards and includes an improved feature set that goes above and beyond base requirements. SharkBite Max certifications include:
- ASSE 1061
- CSA B125.3
- NSF/ANSI/CAN 372
- NSF/ANSI/CAN 61
- NSF/ANSI 14
- ASTM E84
- CAN/ULC S102.2
- ASTM E119
- CAN/ULC S101
- UL 263
Just a little. You don’t need a tube liner for PEX with this fitting — in fact it comes without one.* The insertion depth for Max fittings is also different. Check out the insertion depth chart for the appropriate measurements.
*You’ll still need a tube liner when you use SharkBite Max with HDPE SDR-9 pipe, but that should be provided by the tubing manufacturer.
Yes. While all SharkBite brass fittings are designed for long-term use, they can be disconnected using a disconnect clip, tongs, or the pro disconnect tool if necessary.
Yes, SharkBite Max has a 25-year warranty when properly installed and used with PEX, copper, CPVC and PE-RT pipe. View the full details of the SharkBite warranty here.
Yes. Like all SharkBite brass fittings, SharkBite Max can be buried underground after being wrapped with silicone wrap. It can also be used behind the wall without access panels.
Between 34°F and 200°F (0°C and 93°C).