PEX Press

System Overview

Image Faster Installation & Immediate Testing PEX Press connections can be pressure tested immediately after pressing, allowing inspections faster and avoid project delays.

Image Reliable, Error-Resistant Connections Pipe insertion viewing windows and the locator ridge provide confirmation that the pipe and tool are positioned correctly before pressing.

Image Flexible Across PEX Systems PEX Press is compatible with both PEX-a and PEX-b pipe, so contractors can work across any PEX system.

Learn More: Introducing: SharkBite PEX Press Fittings

Installation Steps

 1. Cut: Use a PEX cutter to make a square, clean cut on the pipe. Do not use a saw or damaged tool. Uneven or angled cuts may result in improper connection. Ensure the pipe is free of burrs, debris, or damage before pressing.

 2. Insert: Slide the SharkBite PEX Press fitting onto the pipe until it reaches the fitting shoulder. Verify full insertion by confirming the pipe is visible through the viewing windows.

 3. Align: Ensure the jaws are aligned squarely and fully engaged on the stainless-steel sleeve. Verify the tool’s locator ridge is positioned on the outside of the jaws, regardless of tool orientation.

 4. Press: Activate the tool fully until it completes the cycle and jaws are completely closed. The jaws will press the sleeve uniformly around the pipe. Do not interrupt the press cycle and do not press the connection more than once.

 5. Inspect: Verify the sleeve is evenly compressed with no gaps.Check the pressed connection using the go/no-go gauge.