WHITE PEX PIPE (Coils)

  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 515.86ms
  • REVIEWS, PRODUCT
  • bvseo-msg: Execution timed out, exceeded 500ms;

Information

SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in red and blue colors. SharkBite PEX is approved for crimp, clamp or push-to-connect plumbing systems. The pipe comes with a repeating SharkBite imprinted pattern which serves as a visual aid to determine if the tube has been inserted correctly into SharkBite Push-to-Connect fittings. This feature only works if the tubing is cut between the SharkBite imprint pattern.

Approvals

ASTM F877-2011a and CSA B137.5-2009

NSF/ANSI 62

SizesPart #
1/4" (3/8" OD) 50' Coil Pipe
U850W50
1/4" (3/8" OD) 100' Coil Pipe
U850W100
3/8" 50' Coil Pipe
U855W50
3/8" 100' Coil Pipe
U855W100
1/2" 25' Coil Pipe
U860W25
1/2" 50' Coil Pipe
U860W50
1/2" 100' Coil Pipe
U860W100
1/2" 300' Coil Pipe
U860W300
1/2" 500' Coil Pipe
U860W500
1/2" 1000' Coil Pipe
U860W1000
3/4" 25' Coil Pipe
U870W25
3/4" 50' Coil Pipe
U870W50
3/4" 100' Coil Pipe
U870W100
3/4" 300' Coil Pipe
U870W300
3/4" 500' Coil Pipe
U870W500
1" 100' Coil Pipe
U880W100
1" 300' Coil Pipe
U880W300
1" 500' Coil Pipe
U880W500
1-1/4" 100' Coil Pipe
U885W100
1-1/2" 100' Coil Pipe
U890W100
2" 100' Coil Pipe
U895W100

Reviews

Rated 4 out of 5 by from A little patience and this stuff is great for the price The other reviewer said it is unworkable. I suspect that it is a matter of patience and common sense. I have not had a single leak with this stuff and any 3/4" pipe is tough in tight corners that is why there are fittings but to make long runs where you would need a lot of fittings for rigid pipe, this stuff works great. The only thing better is weirsbo(?) because it retains shape after freezing but this stuff freezes and still have not had a leak!
Date published: 2011-12-11
Rated 5 out of 5 by from STIFF, but workable...INSTALL tips... I purchased this to replace my 1/2" copper lines to install a water softener. Our home has a 3/4" service coming in, but back in the 50's, they thought that it was a good idea to run everything in half inch. Since I had to make a 35' run just to feed the water softener, I thought that I'd replace all the copper with pex and SharkBites. Project went smooth as silk. DO NOT cut off the outside plastic from the roll of tubing - simply cut the center of the plastic out on ONE side, and then the plastic bands. Find the end of the pipe in the CENTER of the coil, and feed the pipe from there. This way when you feed the new pipe, the coil can simply spin and un-wind as you pull, and the rest of your pipe stays clean. Pipe CAN be straightened, and has a remarkably low "memory" - meaning that when you bend the pipe in the opposite direction of the natural coil curve, it does not want to immediately snap back to that shape. It will try to return to that shape, but VERY slowly, which allows you to complete your install. If you have places where you need to make long runs, a small piece of blue masking tape can be placed over the end of the pipe to keep debris out.
Date published: 2013-04-09
Rated 5 out of 5 by from easy to use I was going to use some copper piping I had on hand for a small job but I noticed that my HD also had 3' length of this available so I grabbed one of those and it made the whole job much easier and cheaper since I did not have to use two 90° elbows... Such a simple system with Sharkbite fittings.
Date published: 2014-02-01
Rated 5 out of 5 by from Less Than Perfect I mean me, not the product. Used pex pipe and associated sharkbite fittings for leak repair and to re-do a shower. Tubing is easily cut and since it is coiled, it is difficult to cut the ends square. However, there were no leaks. Sharkbite fittings are easily removed with the proper tool, allowing for use of the "trial-and-error" method of obtaining a good fit. For this reason the fittings seem to be worth the extra expense.
Date published: 2011-11-28
Rated 4 out of 5 by from good product if you get the 500 ft roll, make sure u have enough help....really difficult to work with, it was like playing with a 500ft spring.
Date published: 2015-02-12
Rated 5 out of 5 by from Very easy to use and work with I have been using PEX piping in my remodel and I am very happy with the quality of the product. I was worried it would not hold up like copper does but in fact I think this product is superior to copper. Much easier to work with and you do not have to solder.
Date published: 2015-07-21
Rated 4 out of 5 by from So far so good The real value of this piping is it's lifetime of service. If it develops leaks in the next 20 years, then it's a poor investment, if no leaks then a great investment. This white piping replaced old grey PEX piping that leaked. This white piping has a narrower inside diameter than the grey PEX, this makes it more difficult when fitting to grey PEX fittings. This white PEX is thicker and stiffer than the grey PEX and seems to be of better quality.
Date published: 2015-01-13
Rated 5 out of 5 by from great product - install tips... I purchased this to replace my 1/2" copper lines to install a water softener. Our home has a 3/4" service coming in, but back in the 50's, they thought that it was a good idea to run everything in half inch. Since I had to make a 35' run just to feed the water softener, I thought that I'd replace all the copper with pex and SharkBites. Project went smooth as silk. DO NOT cut off the outside plastic from the roll of tubing - simply cut the center of the plastic out on ONE side, and then the plastic bands. Find the end of the pipe in the CENTER of the coil, and feed the pipe from there. This way when you feed the new pipe, the coil can simply spin and un-wind as you pull, and the rest of your pipe stays clean. Pipe CAN be straightened, and has a remarkably low "memory" - meaning that when you bend the pipe in the opposite direction of the natural coil curve, it does not want to immediately snap back to that shape. It will try to return to that shape, but VERY slowly, which allows you to complete your install. If you have places where you need to make long runs, a small piece of blue masking tape can be placed over the end of the pipe to keep debris out.
Date published: 2013-04-09
  • y_2018, m_6, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_62
  • loc_en_US, sid_774, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 9.48ms
  • REVIEWS, PRODUCT

Questions

How deep does 1/2" pex pipe go into a sharkbite fitting?

Asked by: Albert H
Hello, SharkBite 1/2" fittings have an insertion depth of 15/16". For additional information please see the 2nd page of our installation instructions in the link below. http://www.sharkbite.com/sharkbite/wp-content/uploads/SharkBite_Installation_Instructions_2018_WEB.pdf Thank you
Answered by: SharkBite118
Date published: 2018-05-22

How well do pek holds up to the cold .replacing pipes under house. How much will about 35 to 40 yards coast

Asked by: Beverly S
Hello, SharkBite PEX tubing holds up great in cold temperatures. It is very important to make sure water is completely drained from lines that are exposed to freezing temperatures. The cost of PEX varies depending on where you purchase it. Your can find places that sell our products locally in the link below. http://www.sharkbite.com/ Regards
Answered by: SharkBite118
Date published: 2018-06-04

What are the pressure ratings for the Pex half and three-quarter inches

Asked by: Patrick s
Hello, Temperature and pressure ratings for SharkBite PEX tubing are as follows: 200°F at 80 psi 180°F at 100 psi 74°F at 160 psi Thank you
Answered by: SharkBite118
Date published: 2018-05-17

My water main has an outside diameter of 1& 3/8". What size pex line is that?

Asked by: Corey Peterson
Hello, PEX tubing with an outside diameter of 1-3/8" will be 1-1/4" nominal size. This will require a 1-1/4" fitting. Thank you
Answered by: SharkBite118
Date published: 2018-05-15

is 3/4 pex suitable for installing a water supply line underground to my home?

Asked by: scott h
Hello, Yes, SharkBite PEX tubing is suitable for use on buried supply lines. It is important that the dirt be free of rocks and debris that could damage the tubing. Please consult your local code for approval. Thank you
Answered by: SharkBite118
Date published: 2018-04-17

Hi! expansion fittings compatible with sharkbite tubing?

Asked by: Rommel
Hello, SharkBite potable water PEX is a type B tubing and is not compatible with expansion fittings. Thank you
Answered by: SharkBite118
Date published: 2018-04-05

Does SharkBite offer either 1 1/2” or 1 1/4” in 500’ roll for plumbing in water lines?

Asked by: Chris Coyle
Hello, SharkBite 1-1/4" and 1-1/2" PEX tubing is currently only available in 20' straight lengths and 100' coils. Thank you
Answered by: SharkBite118
Date published: 2018-03-13

Can I connect copper pipe to pex tubing using the push to connect fittings

Asked by: Chrisl
Hello, Our brass push-to-connect fittings are suitable for connecting any of the below types of pipe/tubing. PEX (ASTM F876, CSA B137.5) Copper (ASTM B 88) CPVC (ASTM D 2846, CSA B137.6) PE-RT (ASTM F 2769) HDPE (SDR-9 ASTM D2737) Thank you
Answered by: SharkBite118
Date published: 2018-03-05
  • y_2018, m_6, d_17, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_63
  • loc_en_US, sid_774, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 9.02ms
  • QUESTIONS, PRODUCT

Related Products

  • BLUE PEX PIPE (Coils)

    Quick View
    Sizes
    • 3/8" 100' Coil
    • 1/2" 25' Coil
    • 1/2" 50' Coil
    • 1/2" 100' Coil
    • 1/2" 300' Coil
    • 1/2" 500' Coil
    • 1/2" 1000' Coil
    • 3/4" 25' Coil
    • 3/4" 50' Coil
    • 3/4" 100' Coil
    • 3/4" 300' Coil
    • 3/4" 500' Coil
    • 1" 100' Coil
    • 1" 300' Coil
    • 1" 500' Coil
    BLUE PEX PIPE (Coils)Find a Store
    Add to Project List
      Clear selection
  • RED PEX PIPE (Coils)

    Quick View
    Sizes
    • 3/8" 100' Coil
    • 1/2" 25' Coil
    • 1/2" 50' Coil
    • 1/2" 100' Coil
    • 1/2" 300' Coil
    • 1/2" 500' Coil
    • 1/2" 1000' Coil
    • 3/4" 25' Coil
    • 3/4" 50' Coil
    • 3/4" 100' Coil
    • 3/4" 300' Coil
    • 3/4" 500' Coil
    • 1" 100' Coil
    • 1" 300' Coil
    • 1" 500' Coil
    RED PEX PIPE (Coils)Find a Store
    Add to Project List
      Clear selection
  • WHITE PEX PIPE (Straight Lengths)

    Quick View
    Sizes
    • 1/4" (3/8" OD) 5' Length Pipe
    • 3/8" 5' Length Pipe
    • 3/8" 10' Length Pipe
    • 1/2" 2' Length Pipe
    • 1/2" 5' Length Pipe
    • 1/2" 10' Length Pipe
    • 1/2" 20' Length Pipe
    • 3/4" 2' Length Pipe
    • 3/4" 5' Length Pipe
    • 3/4" 10' Length Pipe
    • 3/4" 20' Length Pipe
    • 1" 5' Length Pipe
    • 1" 10' Length Pipe
    • 1" 20' Length Pipe
    • 1-1/4" 2-' Length Pipe
    • 1-1/2" 20' Length Pipe
    • 2" 20' Length Pipe
    WHITE PEX PIPE (Straight Lengths)Find a Store
    Add to Project List
      Clear selection
Find a Store
Add to Project List
  Clear selection