PEX CRIMP RING TOOL KIT

PEX CRIMP RING TOOL KIT is rated 3.7 out of 5 by 11.
  • y_2018, m_12, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_763, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 9.95ms
  • REVIEWS, PRODUCT

Information

This is a multi-head crimp tool kit to crimp 3/8”, 1/2”, 3/4” and 1” PEX Tube. This tool also comes with a go/no-go gauge. The crimp tool has a 6” handle and provides about 5,000 lbs of crimping force.

SizesPart #
3/8", 1/2", 3/4", 1" PEX Crimp Ring Tool Kit (Crimp Ring Gauge Included)
23100

Reviews

Rated 4 out of 5 by from Works Great After reading some off the reviews I decided to buy this product. It has in the specifications that it doesn't come with a 1" die. as for the heads coming out it has screws that lock them in place. I haven't had an issue with this product it has performed exactly as designed.
Date published: 2015-03-26
Rated 2 out of 5 by from cost exceeds design Multi-head with set of change out dies great but holding in place over your head while attempting to keep aligned with copper crimp ring while laying on back under house in awkward position is tough. Would suggest the ratchet type. Break over on this tool is tough while attempting to keep copper crimp and tool aligned. Poor instructions. No mention of no die for 1", but utilize tool head without a die to do 1". Kept looking for the missing 1" die. Have come to believe in Sharkbite quality and dependability but this is no wimp tool. Break over is a exercise in determination, tenacity and perseverance.
Date published: 2013-11-14
Rated 5 out of 5 by from I am in the process of building out a laundromat and purchased this tool because I am using every... I am in the process of building out a laundromat and purchased this tool because I am using every size PEX from 1/2" to 1". It is a heavy duty, meaty tool that makes quality crimps quickly in open spaces. I would suggest that if you are doing an area with tight spaces, a pocket crimper should also be on hand for those tight spots. Someone mentioned it was tough to keep the tool, ring and pipe all aligned without having the ring slide out of position. What I did was hold the ring in a pair of pliers when I got everything aligned properly, I slightly compressed the ring just enough to hold it in place on the pex. Then I followed up with the crimper tool. Perfect joint every time!
Date published: 2017-06-30
Rated 4 out of 5 by from Product works as advertised Easy to use. Dies are easy to change, but they would sometimes come off the tool and stay on the crimp ring. Easy to remove from ring and reinstall on tool. No leaks.
Date published: 2013-10-01
Rated 5 out of 5 by from Worked Perfectly Worked perfectly. I'm not strong and was able to use this. We reworked kitchen and bath plumbing, adding a dishwasher, with lots of prayer and youtube videos. :)
Date published: 2016-07-17
Rated 3 out of 5 by from cannot use it in some instances Tool works as advertised. Bought this since it will crimp 1" fittings. I would recommend the other type crimper that uses the steel crimp rings. It only costs $57 and it can be used in tight areas and also on the new Moen frost free single handle faucets. This one crimper tool will do it all at half the cost
Date published: 2012-02-07
Rated 3 out of 5 by from Way too expensive but it works like a charm. This item is a multi-head crimp tool. I only needed the 3/8" one and it wasn't sold. So I had to buy this set. The removal tool doesn't have one for 3/8" though. Go figure. My store unfortunately didn't have the 3/8" one.
Date published: 2012-08-26
Rated 2 out of 5 by from Hard to work in tight spots I bought this tool to repipe my house from copper to PEX. The handles have to open up really wide to get the jaw around the crimp ring. When you're working between floor joists on a vertical pipe it's really hard to be able to crimp because of the wide handle spread that is needed. Other than that problem they work ok..
Date published: 2017-03-29
  • y_2018, m_12, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_763, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 234.97ms
  • REVIEWS, PRODUCT

Questions

I would like to know if I can buy the dies for the 23251 sharkbite tool, I have the 1/2 die but would like to buy the 3/8 and 3/4 dies if possible? Thanks

Asked by: williamm
Hello, Unfortunately, there are no dies available for the 23251 SharkBite crimp tool. This tool is suitable for 1/2" and 3/4" crimps only. SharkBite crimp tool # 23100 will be suitable for 3/8", 1/2", 3/4" and 1" crimps and will include all necessary dies. Please feel free to contact our customer service department at 877-700-4242 if you have any questions. Thank you
Answered by: SharkBite118
Date published: 2018-09-28

Will this tool crimp rings for PB pipes? Thanks. Mark.

Asked by: Mark Garrido
Hello, SharkBite crimp tools are compatible with both SharkBite PEX crimp and SharkBite polybutylene crimp fittings. Thank you
Answered by: SharkBite118
Date published: 2018-08-06

I bought a sharkbite #23100 crimp tool new but it has no 3/4 dies. How do I get a set. I can return to home depot but they no longer carry it. I don’t want their junk Apollo set. 

Asked by: DustinR
Hello, Please call our customer service department at 877-700-4242 for assistance with replacement parts. Thank you
Answered by: SharkBite118
Date published: 2018-03-26

Do they sell the dies individually

Asked by: Mike Yanniello
Hello, Please contact our customer service team at 877-700-4242 for assistance with crimp tool dies. Thank you
Answered by: SharkBite118
Date published: 2018-02-21

Can I get the replacement screws that hold the dies in place?  Morning me r stripped.

Asked by: PatrickC
Good morning, We do not have replacement screws for these tools. The tools that used screws have been obsolete for quite some time now. You can contact customer service to see if they have any options to assist you. You can reach them by phone at 1-877-700-4242 between 8 am - 6 pm est Monday through Friday or by e-mail at techsupport@cashacme.com.
Answered by: SharkBite_KM
Date published: 2018-02-12

I have the shark bite crimp tool but I have lost the dies for 3/8 and 3/4 pex where can I get the new dies and what is a part number

Asked by: Ron B
Hello, Please contact our customer service team at 877-700-4242 for options. Thank you
Answered by: SharkBite118
Date published: 2018-02-13

Is this tool still made in the USA? 

Asked by: BLFreedman
Hello, Yes, this tool is manufactured in the USA. Thank you
Answered by: SharkBite118
Date published: 2017-09-26

i have the pex crimp tool 23100? looking for the ends to crimp 3/8 & 3/4 is there a replacement cost?

Asked by: cavired99
Good morning, We do not sell the crimps separately. Please give our customer service team a call at 1-877-700-4242 between 8 am - 6 pm est Monday through Friday or by e-mail at techsupport@cashacme.com and they can see what options may be available.
Answered by: SharkBite_KM
Date published: 2017-07-19
  • y_2018, m_12, d_15, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_40
  • loc_en_US, sid_763, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 8.2ms
  • QUESTIONS, PRODUCT

Related Products

Find a Store
Add to Project List
  Clear selection