Home Run Manifold with Push-To-Connect Ball Valves

Home Run Manifold with Push-To-Connect Ball Valves is rated 3.5 out of 5 by 2.
  • y_2018, m_12, d_16, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_42720, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 11.08ms
  • REVIEWS, PRODUCT

Information

The SharkBite Manifold with Push-To-Connect Ball Valves serves as a central control valve with individual lines for each fixture. Simply connect PEX tubing to the shutoff valve, thread the shutoff valve to the manifold outlets and run PEX tubing to the fixture.

Approvals

ASTM F877

NSF/ANSI 61

SizesPart #
12 Port - 3/4" Inlet 1/2" Outlet
PM012SB
24 Port - 3/4" Inlet 1/2" Outlet
PM024SB

Reviews

Rated 5 out of 5 by from I love Sark bite I am mad at this hard wear store . For not offering me shark bite products . I had for got about them . I will be taking his stuff back . And fix my water leak quick as a blink . Love Sark bite products,can't say it enough :-) :-
Date published: 2017-12-11
Rated 2 out of 5 by from Great idea- but has flaws I special ordered this product from Lowe's. The body is plastic, but so are the inlet ports. The cold water inlet started to leak and I was unable to stop the leak. The company did send me some brass push-inlet ports, but by then I decided to go another route. Please change the design of the inlet ports to prevent future issues.
Date published: 2018-11-26
  • y_2018, m_12, d_16, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_42720, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 231.72ms
  • REVIEWS, PRODUCT

Questions

For the 12 port HR- are the inlets at the bottom of the manifold? In the picture, it looks as though there are a set of inlets on the top and the bottom??

Asked by: Luciano G
Hello, SharkBite home run manifolds are pictured with the inlets on top of the manifold but may be flipped upside down if you would like to run the supply pipes from below. The caps pictured at the bottom are not designed to be used as inlets. If you have additional questions please contact our customer service department at 877-700-4242. Regards
Answered by: SharkBite118
Date published: 2018-10-23

How many Hot/Cold outlets on HR manifold?

Asked by: John E
Hello, SharkBite manifold part # PM012SB has 6 cold outlets and 6 hot outlets. SharkBite manifold part # PM024SB has 12 cold outlets and 12 hot outlets. Thank you
Answered by: SharkBite118
Date published: 2018-11-22

It appears that the push to connect manifolds have 2 inlets. does one control one side and the other inlet the opposite side? How would I use a 24 outlet for cold water only if there are 2 inlets?

Asked by: George Betz
Hello, This manifold is split into 2 sections (1 side for hot and 1 side for cold). In order to use all outlet ports for cold water you will have to use a tee on the cold water supply line so you can connect cold water to both manifold inlets. Regards
Answered by: SharkBite118
Date published: 2018-09-04

Can the 12 port manifold 3/4 supply in be put at the bottom so that a tee can be added for draining system for winter. 

Asked by: RIck c
Hello, Please contact our customer service department at 877-700-4242 for assistance. Thank you
Answered by: SharkBite118
Date published: 2018-09-17

1. Do these come with a push to connect fitting on the 3/4 inlet? If not, what fitting do you recommend? 2. Do these have a 3/4 outlet on the cold to feed the hot water tank?

Asked by: LJohnson
Hello, Our home run manifolds do not come with push-to-connect fittings on the inlets. The inlets are 3/4" MNPT (male national pipe tapered) thread so any fitting with FNPT (female national pipe tapered) thread will be compatible. Part # U088LF in the link below is an example. This manifold does not have a 3/4" outlet so we recommend using a tee to branch off the cold water line coming into the manifold to feed the hot water tank. http://www.sharkbite.com/product/female-connectors/ Thank you
Answered by: SharkBite118
Date published: 2018-04-05

What are the dimensions of the 24 port manifold in terms of size and weight as I cannot find a supplier in Canada I have to order the product from the US and am looking to calculate shipping costs

Asked by: Jason L
Hello, The package dimensions for this product are 27" x 5" x 5.5" and the weight is 9.4 pounds. Thank you
Answered by: SharkBite118
Date published: 2018-03-21

Do you make a push to connect pex manifold with ball valve that has 3/4 inlet and 3/4 branches?

Asked by: AaronMantooth
Good morning, Not at this time.
Answered by: SharkBite_KM
Date published: 2017-12-20

Can I connect Wirsboro Aqua Pex pipe to the manifold

Asked by: JP33
Good morning, As long as Wirsboro Aqua PEX meets ASTM F1807, you can connect it to our barb fittings.
Answered by: SharkBite_KM
Date published: 2017-12-20
  • y_2018, m_12, d_16, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_42720, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 10.73ms
  • QUESTIONS, PRODUCT

Related Products

Find a Store
Add to Project List
  Clear selection