FAUCET CONNECTORS

FAUCET CONNECTORS is rated 5.0 out of 5 by 2.
  • y_2017, m_12, d_11, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_553, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 9.92ms
  • REVIEWS, PRODUCT

Information

The SharkBite Push-to-Connect Faucet Connector is the fastest and easiest way to connect copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe. These fittings are push-to-connect on one end and come with a 1/2” threaded connection on the other end. They are also easily rotatable after installation for easy installation even in tight spaces.

Approvals

CSA B125.3

NSF 372-2013

SizesPart #
1/4" (3/8" OD) X 1/2" Threaded
U3525LF

Reviews

Rated 5 out of 5 by from Just got this SharkBite fitting to ease the work installing a new bathroom sink and faucet. Layin... Just got this SharkBite fitting to ease the work installing a new bathroom sink and faucet. Laying on my back and fussing with compression fittings is not my idea of a good day., so these fittings are the answer. It is easy to connect the faucet special National Pipe Straight fitting to the normal 1/4 in tube from the wall shut off. Tighten the female pipe fitting by hand and slip the PEX, CBVC, PE-RT, or copper tube in use into the SharkBite adapter fitting. Make sure to slightly taper the outside edge of the tubing and mark the depth to insert into the fitting. No leaks and minimal contortion time. [This review was collected as part of a promotion.]
Date published: 2017-12-02
Rated 5 out of 5 by from Quick installation, watertight seal So neat and easy. Made installation onto copper tubing a cinch.
Date published: 2015-11-11
  • y_2017, m_12, d_11, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_553, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 7.91ms
  • REVIEWS, PRODUCT

Questions

I have two pipes under a bathroom double sink; hot and cold. Each one goes off of a Y to each sink. What Sharkbite connector will replace these?

Asked by: rewdy
Hello, Please send a picture to techsupport@cashacme.com so we can better understand what you need. Thank you
Answered by: SharkBite118
Date published: 2017-04-20

where or part # to convert from national thread (female) TO FAUCET THREAD

Asked by: jj11
Sorry, we do not offer threaded conversion fittings.
Answered by: sharkbite_rm
Date published: 2016-12-08

i am totally confused with all the parts and questions!!!!!!!!! i want to connect two sinks to a 1/2 pex push to fit 1 kitch and 1 bath.?

Asked by: jj11
It sounds like you just need a straight or angle stop. These connect 1/2" PEX (supply line) to 3/8" OD tubing, which is what is found in sinks for kitchen and bathroom. Straight stop - 23037-0000LF Angle stop - 23036-0000LF If you still are confused, please call in to our tech line at 877-700-4242 and we can help you out.
Answered by: sharkbite_rm
Date published: 2016-12-08

Need an end cap for 1/2" heavy chrome/copper pipe

Asked by: cval1
Good morning, We would not recommend using any of our products on a chrome pipe. All our fittings are only certified with Copper, PEX or CPVC.
Answered by: SharkBite_KM
Date published: 2016-10-03

Is this only for use in exposed areas, or is it approved for use in enclosed walls? How about if there is a service panel access?

Asked by: quoki
Good morning, The only products we offer that can no be used behind wall without an access panel are the flexhoses. This item would be okay to be used that way.
Answered by: SharkBite_KM
Date published: 2016-09-07

Most red ans blue water supply lines are now 3/8 and 1/2 faucet fitting.Do you make a push on for this so you just unscrew the fitting from the faucet and not have to reclamp ring or whatever to the fitting?????

Asked by: Bigeagle
The faucet connector in the photo works with 1/4" PEX which is 3/8” OD tubing. That is most likely what you are asking for.
Answered by: sharkbite_rm
Date published: 2016-08-10

i have a standard 2 handle sink faucet. can i use this faucet connector with the pex tubing and then just connect the connector to the faucet? does home depot or lowes carry this?

Asked by: nancy361
Good morning Nancy, Yes. There will be two (2) connectors that will hook up to the two (2) ports on your faucet. We do not sell to Lowe's but you can find the full list by following this link: http://www.sharkbite.com/find-a-store/?type=a_location&zip=&distance=5&ltype=
Answered by: SharkBite_KM
Date published: 2016-05-26

I have a tub filler with 3/4 inch faucet pipes, do you have a faucet connector that will fit?

Asked by: 1kenkelly
Good afternoon, Our faucet connectors are not designed for 3/4 inch pipe. Aside from our standard 3/4 x 3/4 Female National Pipe Thread (link here: http://www.sharkbite.com/product/female-connectors/), we don't have any swivel adapters in that size.
Answered by: SharkBite_KM
Date published: 2016-04-15
  • y_2017, m_12, d_11, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_553, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 8.66ms
  • QUESTIONS, PRODUCT

Related Products

  • MALE CONNECTORS

    Quick View
    Sizes
    • 1/4" X 1/2" MNPT
    • 3/8" (1/2" OD) X 1/2" MNPT
    • 1/2" X 3/4" MNPT
    • 1/2" X 1/2" MNPT Straight
    • 3/4" X 3/4" MNPT Straight
    • 3/4" X 1/2" MNPT Bullnose
    • 3/4" X 1" MNPT Straight
    • 1" X 1" MNPT Straight
    • 1" X 3/4" MNPT
    MALE CONNECTORSFind a Store
    Add to Project List
      Clear selection
  • FEMALE CONNECTORS

    Quick View
    Sizes
    • 1/4" (3/8" OD) X 1/2" FNPT
    • 3/8" (1/2" OD) X 1/2" FNPT
    • 1/2" X 3/4" FNPT
    • 1/2" X 1/2" FNPT Straight
    • 3/4" X 3/4" FNPT Straight
    • 3/4" X 1/2" FNPT Bullnose
    • 1" X 1" FNPT Straight
    FEMALE CONNECTORSFind a Store
    Add to Project List
      Clear selection
  • TOILET CONNECTORS

    Quick View
    Sizes
    • 1/4" (3/8" OD) X 7/8" Ballcock Threads Toilet Connector
    • 1/4" (3/8" OD) X 7/8" Ballcock Threads Toilet Elbow
    TOILET CONNECTORSFind a Store
    Add to Project List
      Clear selection