EB45 LEAD FREE SHARKBITE CONNECTIONS

EB45 LEAD FREE SHARKBITE CONNECTIONS is rated 4.6 out of 5 by 26.
  • y_2017, m_2, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_US, sid_603, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 46.5ms
  • REVIEWS, PRODUCT

Information

The EB45 Pressure Regulator with SharkBite Connections comes equipped with a half cartridge design offering high-end performance for a low cost. The valve itself is easily adjusted between 10-70 psi and comes factory set at 45 psi. The SharkBite connections make installation of this valve quick and easy without sacrificing reliability.

SizesPart #
1/2" EB45-DSB Pressure Regulating Valve with SharkBite Connections
23807-0045
1/2” EB45-SDSB Pressure Regulating Valve with Slip
#24383-0045
1/2" EB45-DUSB Double Union Pressure Regulating Valve with SharkBite Connections
23893-0045
3/4" EB45-DSB Pressure Regulating Valve with SharkBite Connections
23808-0045
3/4” EB45-SDSB Pressure Regulating Valve with Slip
#24384-0045
3/4" EB45-DUSB Double Union Pressure Regulating Valve with SharkBite Connections
23894-0045
1" EB45-DSB PRV with SharkBite Connections
22675-0045
1" EB45-DUSB Double Union Pressure Regulating Valve with SharkBite Connections
23358-0045
1" EB45-DUSB Double Union Pressure Regulating Valve with SharkBite Connections
23945-0045

Reviews

Rated 5 out of 5 by from Easy to install whole-house water pressure regulator The SharkBite slide-on connectors really DO work well for many years. Either copper tube or PEX. Use the inexpensive SharkBite reamer/marker tool to deburr your pipe and mark the correct depth. I have used SharkBite extensively and love the stuff. This 3/4" valve will work well if you have very high pressure, such as city mains and you are on the downhill end of the city. If your water pressure is just slightly high, this valve may not do much. It has significant pressure drop at high flow. For regulating a slightly high water supply for a house, you may need to go up to the 1-1/4" size (with the necessary adapters). [This review was collected as part of a promotion.]
Date published: 2015-04-29
Rated 5 out of 5 by from Easy Installation and Setup As a part whole house plumbing system updating, I have chosen to regulate our city water supply with the SharkBite EB-45 ¾” bronze direct push-fit x push-fit pressure regulator. Once I identified a suitable location to install the pressure regulator (PR,) I measured and marked the location where the pipe was to be removed. Next, I turned off my water supply, bleed-off the existing water pressure from the system, closed nearby shut-off valves to minimize water loss, and then made my cuts on the plumbing. Although, most of my updated plumbing is PEX, I chose to use ¾” copper from my meter to the PR valve, and my whole house water filter. When installing the PR valve, make sure your pipes are clean and bur free. Firmly push to fit the connections. Using a pressure gauge (Not supplied) set your desire pressure, and you’re done! [This review was collected as part of a promotion.]
Date published: 2015-11-19
Rated 5 out of 5 by from Works Great It is so easy to install, after I replaced galvanize pipes in my house for copper I was surprise to see the water pressure was at 120psi, So i went to home depot and purchase this one as it is so easy to instal, 10 minutes later I was done. There is an arrow that shows the direction of water, so it has to be installed that way otherwise it will not work properly.
Date published: 2015-04-02
Rated 5 out of 5 by from water regulator I had no problem installing it,took 10 min start to finish,There no noise or vibration some has said it does,i believe they have other problems with there system,and there plenty of water pressure just have to adjust to your psi you like,it set at 40psi from manufacture but can be adjust up to 70psi which is max psi by code.
Date published: 2015-02-06
Rated 5 out of 5 by from 10 min install. Great product We have an older home (1940s) and have been experiencing water hammer for a long while. I've tried everything to fix it. On a whim I finally checked out water pressure, and it was 120psi! Way above and beyond the safe level. I found this product, and having used sharkbites before, I went and grabbed one this morning. Took 10 mins total (high estimate on time). Water pressure immediately went down to 45psi. Great product!!!
Date published: 2015-01-20
Rated 5 out of 5 by from GREAT quality Remarkably easy to install and seem to work great. not a single drip! The SharkBite system is truly amazing! [This review was collected as part of a promotion.]
Date published: 2015-02-20
Rated 5 out of 5 by from This unit was so easy to install it should be illegal! Upon inspection it seemed this product would leak.....NOT it took 30 minutes to measure and cut the pipe. and 1 minute to install the new regulator! I was amazed how secure and well performs.......added great water pressure to my shower and dry as a bone with no soldering.....highly recommend [This review was collected as part of a promotion.]
Date published: 2015-01-23
Rated 5 out of 5 by from The sharkbite make installation a breeze The product works as described. The only issue I have is that the directions don't give you dimensions to cut your pipe to. They want you to buy a gaging device. I didn't do this. Just used a caliper and took my own measurements. The sharkbite fittings worked great with no leaks. Much easier and cleaner than soldering the joint.
Date published: 2013-07-02
  • y_2017, m_2, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_26
  • loc_en_US, sid_603, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 20.54ms
  • REVIEWS, PRODUCT

Questions

I need to increase the pressure from 45psi to 60psi how many turns to the right will it take to do that? I don't have a pressure gage

Asked by: hawk
Good morning, There isn't a such guide regarding turn amount that equals a certain PSI. 1/4 turn is roughly 4-5 PSI. You should get a pressure gauge to make sure you have the desired PSI you need for your building. We offer Push-To-Connect fittings with gauges. Link here: http://www.sharkbite.com/product/pressure-gauges/
Answered by: SharkBite_KM
Date published: 2017-01-03

Does the pressure reduction valve come in one inch ? if so what is the model numbr

Asked by: staninmarysville
Yes, we do offer the 1" EB45 in SB connections. Model # is 22675-0045.
Answered by: sharkbite_rm
Date published: 2016-11-11

My pressure regulator will not go above 45psi. I have tried turning the bolt as instructed, however the PSI does not exceed 45.

Asked by: Bryan76
Good morning, During installation, some debris may have become stuck in your valve. Please do the following: - Remove the cartridge and clean it so that nothing is clogging it - Confirm your incoming PSI is higher then 45 PSI After doing the above, please give us a call at 1-877-700-4242 between 8 am - 6 pm est Monday through Friday or by e-mail at techsupport@cashacme.com and we will be happy to work with you on the next steps to resolve this issue.
Answered by: SharkBite_KM
Date published: 2016-08-08

My city is bringing a water tower online in a few weeks and said the preasure may go as high as 80 to 90 psi and we need to install a PVR. Would this product handle that level of preasure on the inlet side and reduce it down to the listed 10 to 70 PSI

Asked by: Db34
Greeting DB34, After further review, this PRV can withstand up to 200 PSI due to the restriction of the SharkBite connections. The previous response was incorrect. Your system is still within the operation range for this product. If you have any concerns or questions, please feel free to reach out to our Customer Service Team at 1-877-700-4242 between 8 am - 6pm est Monday through Friday or at techsupport@cashacme.com.
Answered by: SharkBite_KM
Date published: 2016-04-13

What are the dimensions for the double union and direct fit (EB45-DSB and EB45-DUSB)? 

Asked by: junebug
Good afternoon, Please see the links below: EB45-DUSB: http://www.cashacme.com/cashacme/wp-content/uploads/2014/08/EB45-DSB_Spec_20141.pdf EB45-DSB: http://www.cashacme.com/cashacme/wp-content/uploads/2014/08/EB45-SDSB_Spec_2014.pdf
Answered by: SharkBite_KM
Date published: 2016-03-19

Is there a procedure for setting the pressure to 12 pounds on the EB45 without a in line pressure guage?

Asked by: Herbster
Greetings Herbster, We do not have any screw measurements or depths that will suggest the pressure set at. We wouldn't be able to give exact measurements if we did as there will be variance. We apologize for the inconvenience this may cause. You could look at the EB 25 that has a "gauge" at the top that gives you an estimate but the EB 25 only goes down to 20psi. (EB 25 Link: http://www.cashacme.com/cashacme/wp-content/uploads/2014/08/EB25-DUSB_Spec_2014.pdf).
Answered by: SharkBite_KM
Date published: 2015-11-30

Are the 3/4" double union pressure reducing valves still being made? We cannot find them online or near us. Please help!

Asked by: Evckacy
Greetings Evckacy, You can visit any of your local SharkBite/Cash Acme vendors and they can supply you with this product. They may not have in stock currently, but can special order the double union EB 45. Please see the links below. Cash Acme EB 45: http://www.cashacme.com/cashacme/wp-content/uploads/2014/08/EB45_Spec_2014.pdf Part Number for Double Union EB 45 w/ SharkBite: 23894-0045
Answered by: SharkBite_KM
Date published: 2016-05-09

does this have a built in check valve for flow orientation?

Asked by: rrrr
Greetings RRR, This valve has a internal bypass. This will allow flow to go in either direction. You must install this valve with the arrow in the direction of the current to get reduced pressure. If there is a backflow situation, this valve will not prevent water from flowing in the opposite direction.
Answered by: SharkBite_KM
Date published: 2015-11-11
  • y_2017, m_2, d_20, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_603, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 10.61ms
  • QUESTIONS, PRODUCT

Related Products

Find a Store
Add to Project List
  Clear selection