CRIMP RINGS

CRIMP RINGS is rated 5.0 out of 5 by 27.
  • y_2018, m_12, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_717, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 16.58ms
  • REVIEWS, PRODUCT

Information

SharkBite crimp rings are used to install barbed fittings with PEX pipe. The crimp fitting is barbed for installing inside the PEX pipe and a crimp ring is used on the outside of the pipe to make a secure connection.

Approvals

ASTM F1807

SizesPart #
3/8" (qty 100)
23101
1/2" (qty 100)
23102
3/4" (qty 100)
23103
1" (qty 25)
23104
1-1/4" (qty 50)
24676
1-1/2" (qty 50)
24677
2" (qty 20)
24678

Reviews

Rated 4 out of 5 by from easy to use easy to use was in the heating and plumbing industry and have used both stainless and copper crimp rings and prefer the copper
Date published: 2012-04-11
Rated 5 out of 5 by from Necessary for PEX Install Buying a pack of these copper crimp rings are required if you want to use the crimp style fittings on PEX pipe. These work well. They provide a strong and tight connection to PEX pipe. I've never experienced any leaks using these rings.
Date published: 2014-08-06
Rated 5 out of 5 by from Very Nice. High quality and the hold just like they are supposed to.
Date published: 2012-09-18
Rated 5 out of 5 by from Easy Installs easy, sometimes hard to get into places with the tool but overall they work great. If you mess up you can just cut the ring off and re use the fittings.
Date published: 2015-05-01
Rated 5 out of 5 by from Easy to use This product makes installing water lines a breeze. Any one can plumb with pex.
Date published: 2012-07-10
Rated 5 out of 5 by from Great product My husband watched our plumber install with these during a bathroom remodel and decided he could do it. These little things worked very well with the tool he purchased. They absolutely will prevent any leaks when installed according to directions and with the proper tool.
Date published: 2016-08-02
Rated 5 out of 5 by from PEX crimp rings Excellent fit and crimps evenly, forms a very secure pipe connection. I did have to remove one and that was simple, the tubing was well fitted to the TEE I had crimped it to.
Date published: 2015-01-28
Rated 5 out of 5 by from Not a lot to say here - they work well, and packages are very consistent and I have not found a s... Not a lot to say here - they work well, and packages are very consistent and I have not found a single flaw to this point.
Date published: 2017-05-13
  • y_2018, m_12, d_15, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_717, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 36.37ms
  • REVIEWS, PRODUCT

Questions

Can these crimp rings be used underground. Thanks.

Asked by: Dan32
Hello, Brass SharkBite fittings and copper crimp rings may be used underground but they must be wrapped using our SharkBite Silicone Wrap. Below you will find a link to our wrap and a video that goes over how to wrap the fitting. http://www.sharkbite.com/product/sharkbite-silicone-wrap/ http://www.sharkbite.com/how-to/how-to-silicone-wrap/ Best regards,
Answered by: SharkBite118
Date published: 2018-10-01

Can i switch between brass and plastic fittings and use the same crimp rings? I'm using copper crimp rings, and the very first connection was pex to brass drop ear 90, the go/no go won't go on the crimp, new tool. First crimp.

Asked by: Clinton b
Hello, Our brass barb and poly alloy barb fittings are both compatible with our copper crimp rings. The "GO" portion of the gauge should go over the crimped ring and the "NO GO" portion of the gauge should not go over the crimped ring. The crimping tool will leave a small lip on opposite ends of the crimp ring that needs to be inserted into the gauge in the proper direction. The instructions that came with your tool will have an illustration that explains this. If you are still experiencing issues please refer to the included instructions for calibration directions. Thank you
Answered by: SharkBite118
Date published: 2018-05-08

Is there any other way to take the crimp ring off?

Asked by: Andrea G
Good morning, To remove the ring, you must cut the fitting out and then use our ring removal tool. You can find a link to them here: http://www.sharkbite.com/product/crimp-ring-removal-tool/
Answered by: SharkBite_KM
Date published: 2018-02-12

Will your crimp rings work on garden hoses as well as rubber air lines? The air lines go up to 200 psi. Hope they do as it would help a lot.

Asked by: Scott 594
Good morning, Our fittings and rings are only certified to be used with Potable water or up to 100% glycol solution. We recommend not using our products on anything other than these.
Answered by: SharkBite_KM
Date published: 2016-10-27

I need an 5/8" Pipe Insulator for my 1-inch crimper & need 5/8" rings

Asked by: Enuk
Good afternoon, We do not have 5/8 inch Crimp Rings. We do offer 5/8 inch Clamp Rings (PN: UC954) but this uses a different tool (Link: http://www.sharkbite.com/product/pex-clamp-tools/).
Answered by: SharkBite_KM
Date published: 2016-08-29

Can I use either or copper ring or ss crimp ring on same tubing

Asked by: Steven
Good morning, Yes. As long as the PEX tubing you use meets the same codes and standards as our fittings and rings, you can switch between crimp rings and clamp rings during a project.
Answered by: SharkBite_KM
Date published: 2016-07-24

should the 90's be able to rotate after they are crimped

Asked by: Home owner505
Good morning, No. You maybe able to rotate if you apply some force, but our Barb Fittings should not freely rotate or spin around after being crimped or clamped.
Answered by: SharkBite_KM
Date published: 2016-04-11

I have quest/pet crimp tools that I've been using for years. Can I use these on the shark crimp rings or do I need a specific Shark crimp tool?

Asked by: Joe Hammer
Greeting Joe, As long as you are using a crimp tool that matches the same standards as our rings, there should be no issues. Standards ASTM F1807 CSA B137.5
Answered by: SharkBite_KM
Date published: 2015-09-14
  • y_2018, m_12, d_15, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_717, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 30.24ms
  • QUESTIONS, PRODUCT

Related Products

Find a Store
Add to Project List
  Clear selection