45° Hose Bibb

45° Hose Bibb is rated 4.3 out of 5 by 23.
  • y_2018, m_12, d_16, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_42480, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getAggregateRating, 17.71ms
  • REVIEWS, PRODUCT

Information

The SharkBite No-Kink 45 Degree Hose Bibb combines either a 1/2″ or 3/4″ Push-To-Connect inlet with a 3/4″ MHT outlet connection at a 45 degree angle to prevent hose kinks. The hose bibb has a durable forged body for strength and comes with an integrated mounting flange to secure the valve to the mounting surface. The valve is available in quarter-turn and multi-turn to enable the regulation of water flow to the desired amount. The inlet is compatible with Copper, PEX, CPVC or PE-RT pipes and requires no use of any solder, glue, unions or additional tools.

Approvals

NSF 372

NSF/ANSI 61

SizesPart #
1/2" X 3/4" MHT - Quarter Turn - No Kink
24630LF
3/4" X 3/4" MHT - Quarter Turn - No Kink
24631LF
1/2" X 3/4" MHT - Multi Turn - No Kink
24632LF
3/4" X 3/4" MHT - Multi Turn - No Kink
24633LF

Reviews

Rated 5 out of 5 by from Perfect for my application. Building a new concrete dock and the cpvc water lines were installed embedded in the concrete. The installer’s plan was to transition from cpvc slip connection to a threaded brass connection and then install a ball valve. That would have looked terrrible in my opinion and been at risk of damage due to the distance it would have projected from the concrete pilaster.
Date published: 2017-09-21
Rated 5 out of 5 by from My old outdoor faucet was shot. I managed to get it off the 1/2" copper line coming out of the s... My old outdoor faucet was shot. I managed to get it off the 1/2" copper line coming out of the stucco wall on the outside of the house, then cleaned the outside of the line real good with very fine sand paper, then pushed on the Shark Bite 1/2" push to connect no kink hose bibb. It sealed tight as a drum; it looks great and works great. The Shark Bite probably saved me at least $100.00 or more plumber bill. Shark Bite has great products!
Date published: 2017-09-19
Rated 5 out of 5 by from Had a leaky outdoor spigot which could not be repaired. This was a clean and quick replacement j... Had a leaky outdoor spigot which could not be repaired. This was a clean and quick replacement job. Love the quarter turn design and have used plenty of SharkBite fittings with my basement finishing work. Suitable for southern climates -- I'd do a bit of homework if wanting to enjoy the incredible ease of installation in a northern home. Perhaps someone from SharkBite or a few northern DIYer's can comment on that.
Date published: 2018-05-22
Rated 5 out of 5 by from The faucet was strange looking at first but has become... The faucet was strange looking at first but has become a new favorite. It is a fast & easy replacement. This also proved to be a fix for when I have a short hose bib exterior wall connection. I will purchase more of these for my truck stock for future home repairs & replacements.
Date published: 2018-04-10
Rated 5 out of 5 by from Excelllent because with a straight cut and clean brass pipe,... Excelllent because with a straight cut and clean brass pipe, there is no easier installation of a hose bib in the garage or the back yard. The valve shuts the water off and on completely drip free. A great product!
Date published: 2018-10-30
Rated 3 out of 5 by from Great for what I wanted to do but, this is... Great for what I wanted to do but, this is the first SharkBite push to connect I had to mess with to get to seal properly. Maybe the one I have had some debris inside it? Who knows. Works well now.
Date published: 2018-07-24
Rated 5 out of 5 by from This was a easy install, press in the pipe to the fitting, and push pipe and valve thru a existin... This was a easy install, press in the pipe to the fitting, and push pipe and valve thru a existing hole in sill plate, and secure the vale to the wall and connect to the existing water line.
Date published: 2018-10-09
Rated 5 out of 5 by from This was great. A perfect solution when you don't... This was great. A perfect solution when you don't want to use a torch. I have used Shark Bite products now on 3 separate projects at my home. No leaks at all. Great products.
Date published: 2018-07-24
  • y_2018, m_12, d_16, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_en_US, sid_42480, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getReviews, 9.36ms
  • REVIEWS, PRODUCT

Questions

I want to know if the sharkbite sillcock can withstand the cold winter in the North East, like let's say Maryland or VA? What is the rating for winter and if the rubber ring/stainless steel teeth that crimp to the copper pipe would last in the hot.

Asked by: PaulC
Hello, SharkBite hose bibbs are suitable for the low temperatures commonly found in the Northeast as long as the water inside the pipe/fitting is not allowed to freeze. Frozen water anywhere in the line will create pressure that can damage the pipe and/or valve. The EPDM rubber O-ring and 316 stainless steel grab ring teeth are designed for this application. Regards
Answered by: SharkBite118
Date published: 2018-09-26

Will the 1/2” shark bite fittings work on 15mm PEX? That is what my houseboat is plumbed with. 

Asked by: Todd H
Hello, SharkBite push-to-connect fittings are approved for use with PEX tubing complying with standard ASTM F876 but are not compatible with metric sized PEX tubing. Regards
Answered by: SharkBite118
Date published: 2018-08-22

How much copper pipe needs to stick out of the wall for the hose bibe to connect and the outside of the faucet ring to fit fit flush against the wall?

Asked by: Eric W
Hello, If the hose bibb has a 1/2" inlet 15/16" of pipe will need to stick out of the wall. If the hose bibb has a 3/4" inlet 1-1/8" of pipe will need to stick out of the wall. Please see the video below for additional information. https://www.youtube.com/watch?v=cpeBuQEIeT8 Thank you
Answered by: SharkBite118
Date published: 2018-08-08

Will scale inside the existing copper pipe affect the integrity of a Sharkbite fitting?

Asked by: Patrick W
Hello, Scale inside existing copper pipes will not affect the integrity of SharkBite push-to-connect fittings but scale that breaks away from the pipe could potentially get lodged in valves preventing them from sealing properly. Regards
Answered by: SharkBite118
Date published: 2018-08-01

I have a shark bite connection piece that has come apart. It is connecting pvc plumbing. Can it be put back together or do I need a new connector

Asked by: Susan K
Hello, When the internals of a SharkBite push-to-connect fitting come out from inside the fitting it is typically due to pressure caused by frozen water. Frozen water expands causing tremendous pressure that can damage pipe and fittings. When the internals are separated from the body the fitting must be replaced. Regards
Answered by: SharkBite118
Date published: 2018-07-15

can you connect a 3/4 brass pipe to the sharkbite push connection

Asked by: TomK60
Hello, Unfortunately, our SharkBite fittings will not work on brass pipe. SharkBite Universal Fittings are designed for use with CTS tubing (Copper, PEX, CPVC and PE-RT). Best regards,
Answered by: SharkBite_BH
Date published: 2018-05-21

Adding fittings to half inch copper existing line. How much do I cut to add a tee

Asked by: Fred d
Hello, When installing a 1/2" tee (part# U362LF) on an existing line you will need to remove 0.47 inches of pipe/tubing. Best regards,
Answered by: SharkBite_BH
Date published: 2018-05-11

How do I remove a sharkbite hose bibb

Asked by: Bob Wex
Hello, 1. Remove the mounting screws from the flange. 2. Pull the hose bibb from the wall to access the release collar on the back side of the flange. 3. Place the disconnect clip around the pipe and use it to push in the release collar while pulling the hose bibb from the pipe. Please see page 3 in the below link for more information. http://www.sharkbite.com/sharkbite/wp-content/uploads/SharkBite_Installation_Instructions_2018_WEB.pdf Thank you
Answered by: SharkBite118
Date published: 2018-05-02
  • y_2018, m_12, d_16, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_42480, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sharkbite
  • bvseo_sdk, p_sdk, 2.3.0.1
  • CLOUD, method:getContent, 9.47ms
  • QUESTIONS, PRODUCT

Related Products

Find a Store
Add to Project List
  Clear selection